AC Drive China Forum
Forum » PLC - Programmable Logic Controller » Complete plc project with hmi using siemens step 7 and wincc?
Topics: Complete plc project with hmi using siemens step 7 and wincc? on PLC - Programmable Logic Controller
#1
Start by
mohammad behzadi
10-26-2013 06:30 PM

Complete plc project with hmi using siemens step 7 and wincc?

does anyone have a complete plc project with hmi using siemens step 7 and wincc? i need a regular plc project that has been done by siemens step 7 and wincc ???
please...... it's urgent
10-26-2013 08:31 PM
Top #2
Jiri Masopust
10-26-2013 08:31 PM
Hello,
which version of Step 7 do you need? Step 7 for S7-300 PLC or Step 7 MicroWin for S7-200?
10-26-2013 11:27 PM
Top #3
mohammad behzadi
10-26-2013 11:27 PM
step 7 for S7-300 .. SIMATIC STEP 7 AND WINCC
10-27-2013 02:21 AM
Top #4
Jiri Masopust
10-27-2013 02:21 AM
Try this example project which is directly from Siemens Company.

http://support.automation.siemens.com/WW/llisapi.dll?func=cslib.csinfo&objid=31624179&nodeid4=20229806&caller=view&switchLang;31624179;2.x=34&switchLang;31624179;2.y=4&lang=en&siteid=cseus&aktprim=4&objaction=csopen&extranet=standard&viewreg=WW
10-27-2013 04:44 AM
Top #5
Jiri Masopust
10-27-2013 04:44 AM
I tried to find some old project on my harddisk but I found only the projets for S7-200 and Protool :-(.
10-27-2013 07:12 AM
Top #6
Ahmad KolahiZonouzi
10-27-2013 07:12 AM
Salam Mohammad,
Do you need to write a S7 and HMI project ? If positive, I am a Siemens S7 and WinCC programmer, and I may do it for you. I am expert in water and waster water treatment for petrochemical and power plants, but I may easily get into the new subject if there is a good process man and control philosophy. If interrested please consider to see my resume.
Best regards,
Ahmad
Reply to Thread
You may interested
Newest posts
AC Drive China © 2024 All Right Reserved
Contact | Terms