AC Drive China Forum
Forum » General Discussion » Electric motors
Topics: Electric motors on General Discussion
#1
Start by
Engr. Segun Bolaji
09-16-2013 10:08 PM

Electric motors

Looking for a good source to get fairly used electric motors ranging from 3hp, 5hp, 7.5hp, 10hp, 15hp, 20hp, 25hp, 30hp, 40hp and 50hp electric motors.
09-17-2013 12:23 AM
Top #2
William "Bill" Schell
09-17-2013 12:23 AM
There is used electric stuff wholesaler in Geneva, new your , something like b&g...
Bill
09-17-2013 02:27 AM
Top #3
William "Bill" Schell
09-17-2013 02:27 AM
Also I use to remind motors for GE apparatus service shop inwilmington Delaware , call them
Bill
09-17-2013 05:13 AM
Top #4
Engr. Segun Bolaji
09-17-2013 05:13 AM
Please can you kindly link me or give me their website.Thank you.
09-17-2013 07:49 AM
Top #5
Gary Sutton
09-17-2013 07:49 AM
I find that Mendelson's is an excellant source for used equipment.

http://www.meci.com/
09-17-2013 10:01 AM
Top #6
Mandy Fan
09-17-2013 10:01 AM
You need AC drive for motors?
09-17-2013 12:14 PM
Top #7
Travis Griffith
09-17-2013 12:14 PM
As reference, most oil & gas operations run their LV motors to destruction and replace them.
The cost to rebuild small motors, yielding a poorer machine than a new one, is not worth their risk of a second failure.
Depending upon the company, most have that break even point about 100 Hp.
09-17-2013 02:22 PM
Top #8
Nitin Joshi
09-17-2013 02:22 PM
i can supply low cost used or unused motors from 1hp to 100hp as per your requirement.
Give me all detail regarding this means voltage/rpm/phase and contact detail
regards
Nitin joshi
Elmech motors and controls
india ndhjoshi65@yahoo.ca
09-17-2013 09:36 PM
Top #9
Delhiwala Saifuddin
09-17-2013 09:36 PM
we are stockists of re conditioned and new branded motors ranging from 3 hp to 2000 hp, any rpm, cage or slipring, LT or HT, with one yr warranty,
M/s House of power equipments plot no 162/163, 4th lane, darukhana, behind brittania industries, Mumbai 400010 India. sjdhope@gmail.com ssdhope@gmail.com
09-18-2013 12:13 AM
Top #10
krishnavelu A B
09-18-2013 12:13 AM
Hi

I am manufacturer in india. If you are interested we are willing send more details. Mail your requirement krishnavelu@gmail.com
Reply to Thread